~ / media / rv12is / wings

wings

13 photos · 2 sub-albums
sub-albums

browse deeper

2026-08-239 photos

Kit arrivals & rib deburring
2026-07-314 photos

Wings started
Kit arrivals & rib deburring
2026-08-23
Kit arrivals & rib deburring
2026-08-23
Kit arrivals & rib deburring
2026-08-23
Kit arrivals & rib deburring
2026-08-23
Kit arrivals & rib deburring
2026-08-23
Kit arrivals & rib deburring
2026-08-23
Kit arrivals & rib deburring
2026-08-23
Kit arrivals & rib deburring
2026-08-23
Kit arrivals & rib deburring
2026-08-23
Wings started
2026-07-31
Wings started
2026-07-31
Wings started
2026-07-31
Wings started
2026-07-31
Kit arrivals & rib deburring
Kit arrivals & rib deburring Kit arrivals & rib deburring · 2026-08-23
All of the pieces unpacked in the backyard before being brought inside for inventorying.
All of the pieces unpacked in the backyard before being brought inside for inventorying. Kit arrivals & rib deburring · 2026-08-23
Up close of the scratch on the wing spar.
Up close of the scratch on the wing spar. Kit arrivals & rib deburring · 2026-08-23
Up close of the incorrectly countersunk rivets. The middle one is really bad, and I was going to ask my technical counselor about this as well.
Up close of the incorrectly countersunk rivets. The middle one is really bad, and I was going to ask my technical counselor about this as well. Kit arrivals & rib deburring · 2026-08-23
The whole fuselage bulkhead. The other rivets look good.
The whole fuselage bulkhead. The other rivets look good. Kit arrivals & rib deburring · 2026-08-23
The wing ribs and all of the other pieces on the floor of the workshop.
The wing ribs and all of the other pieces on the floor of the workshop. Kit arrivals & rib deburring · 2026-08-23
Working on the flaperon counterbalances while deburring of the wing ribs is happening.
Working on the flaperon counterbalances while deburring of the wing ribs is happening. Kit arrivals & rib deburring · 2026-08-23
The flaperon pieces that used to have to be fabricated, but are now provided by Vans, which makes things a lot easier than the instructions would imply.
The flaperon pieces that used to have to be fabricated, but are now provided by Vans, which makes things a lot easier than the instructions would imply. Kit arrivals & rib deburring · 2026-08-23
The flaperon leading edge. I'm not proud to show this, but if it helps somebody, that's awesome. See the hole on the right which was drilled straight with a #30 and the hole on the left which was a #40 before the #30 drill.
The flaperon leading edge. I'm not proud to show this, but if it helps somebody, that's awesome. See the hole on the right which was drilled straight with a #30 and the hole on the left which was a #40 before the #30 drill. Kit arrivals & rib deburring · 2026-08-23
Wings started
Wings started Wings started · 2026-07-31
The fuselage crate.
The fuselage crate. Wings started · 2026-07-31
Fasteners counted, labeled, and organized.
Fasteners counted, labeled, and organized. Wings started · 2026-07-31
Stub spar assemblies on the plans.
Stub spar assemblies on the plans. Wings started · 2026-07-31